Start Gate tutorial
Re: Start Gate tutorial
Add or subtract 1.57 from the rotation. It's not rocket science
Re: Start Gate tutorial
startinggate:
[466.16 0.00 638.82] 1.570796326794896619231216916398
[466.16 0.00 642.82] 1.570796326794896619231216916398
[466.16 0.00 646.82] 1.570796326794896619231216916398
[466.16 0.00 650.82] 1.570796326794896619231216916398
[466.16 0.00 654.82] 1.570796326794896619231216916398
[466.16 0.00 658.82] 1.570796326794896619231216916398
[466.16 0.00 662.82] 1.570796326794896619231216916398
[466.16 0.00 666.82] 1.570796326794896619231216916398
[466.16 0.00 670.82] 1.570796326794896619231216916398
[466.16 0.00 674.82] 1.570796326794896619231216916398
[466.16 0.00 678.82] 1.570796326794896619231216916398
[466.16 0.00 682.82] 1.570796326794896619231216916398
[466.16 0.00 638.82] 1.570796326794896619231216916398
[466.16 0.00 642.82] 1.570796326794896619231216916398
[466.16 0.00 646.82] 1.570796326794896619231216916398
[466.16 0.00 650.82] 1.570796326794896619231216916398
[466.16 0.00 654.82] 1.570796326794896619231216916398
[466.16 0.00 658.82] 1.570796326794896619231216916398
[466.16 0.00 662.82] 1.570796326794896619231216916398
[466.16 0.00 666.82] 1.570796326794896619231216916398
[466.16 0.00 670.82] 1.570796326794896619231216916398
[466.16 0.00 674.82] 1.570796326794896619231216916398
[466.16 0.00 678.82] 1.570796326794896619231216916398
[466.16 0.00 682.82] 1.570796326794896619231216916398
Re: Start Gate tutorial
Sorry for db. I got it to work.
-
- Posts: 265
- Joined: Mon Aug 15, 2011 1:49 pm
- Team: Privateer
- Location: Germany
Re: Start Gate tutorial
Im new to all this track editing and stuff so im not sure if I did what you said completely correct because im now stuck with only one gate and it hasnt moved at all. Sorry for bringing back a dead thread.
Pumaxcs wrote:Would've ran smoother if Sween did it. That guy is the best.
WellsMX524 wrote: Diamond is a joke of a "skate brand". Just another Zumiez shelf stocker.
-
- Posts: 6614
- Joined: Fri Feb 18, 2011 6:03 pm
- Team: me
- Location: Charleston, SC
Re: Start Gate tutorial
when you move your mouse around, over on the left youll see the coordinates for where the cursor is. So place that cursor where you want gate 1. write down the coordinates, so for example [1475 800] then find about where you want your last gate and do the same thing. so for example the last gate at [1382 805], you would then enter it into the starting gate setup box just like that... 1475 800 1382 805 and press enter. the list that is gives you is what you copy paste into the timing gates file under "starting gates".
Hope that helps.
Hope that helps.
-
- Crushed Dissenter
- Posts: 3245
- Joined: Thu Feb 16, 2012 8:33 pm
- Team: MotardMatt220
- Location: KTM57
Re: Start Gate tutorial
Just commenting so that this is in my "view your posts", i need this often and it always takes me ages to find it
jlv wrote: Motardmatt220 is a crock of shit
KTM57 wrote: August is 13 years old and thinks he's hot shit because he's a lot younger than everyone else
Re: Start Gate tutorial
I put the numbers from the website into the "timing_gates" folder and now they disappeared
jlv wrote:Because he didn't come in here and confess like an idiot.Rush wrote:Why was UID 12235 not banned as well? he was doing the same thing.
Re: Start Gate tutorial
Timing gates FOLDER? You mean file right?Jack175 wrote:I put the numbers from the website into the "timing_gates" folder and now they disappeared
Discord: StorkeN#6883 - StorkenMXS Youtube - StorkenMXS Instagram - StorkenMXS Facebook - TMFR on Faceboook
Re: Start Gate tutorial
Yeah sorry
jlv wrote:Because he didn't come in here and confess like an idiot.Rush wrote:Why was UID 12235 not banned as well? he was doing the same thing.
Re: Start Gate tutorial
And the gates disappeared not the numbers just to clear that up
jlv wrote:Because he didn't come in here and confess like an idiot.Rush wrote:Why was UID 12235 not banned as well? he was doing the same thing.
-
- Posts: 1938
- Joined: Fri Jun 21, 2013 5:38 pm
- Team: Elevated Motorsports
Re: Start Gate tutorial
Guys, is this outdated, or am I just doing it horribly wrong? I got my X and Z of start and end, put them in the Gate Setup, copied that, then put it in my timing gate file. Nothing happens
TeamHavocRacing wrote:it's all the liberals fault
-
- Posts: 1938
- Joined: Fri Jun 21, 2013 5:38 pm
- Team: Elevated Motorsports
-
- Posts: 1938
- Joined: Fri Jun 21, 2013 5:38 pm
- Team: Elevated Motorsports
Re: Start Gate tutorial
triple post, i thought i had it working, but apparently not. Really have no idea what I'm doing wrong here.
TeamHavocRacing wrote:it's all the liberals fault
Re: Start Gate tutorial
X and Y coordinates maybe this will help:DBRider251 wrote:triple post, i thought i had it working, but apparently not. Really have no idea what I'm doing wrong here.
Discord: StorkeN#6883 - StorkenMXS Youtube - StorkenMXS Instagram - StorkenMXS Facebook - TMFR on Faceboook